Skip to main content
PermitBase

Residential Addition / Remodel / Accessory Structure Permit in Florence, Arizona

Required for room additions, non-cosmetic remodels, and residential accessory structures (over the 200 sq ft/10 ft wall-height permit-exempt threshold) in Florence, reviewed against the 2018 IRC as adopted and amended by the Town.

Verified 2026-07-06 · Source

When you need this permit

  • Building permit required for additions, non-cosmetic remodels, and accessory structures exceeding 200 sq ft floor area / 10 ft wall height (the Town's permit-exempt threshold)
  • Purely cosmetic finish work (painting, papering, tiling, carpeting, cabinets, countertops) does not require a permit
  • Building Permit Application lists 'Remodel' and 'Accessory (detached)'/'Addition (attached)' as distinct permit-type checkboxes
  • Plans must comply with Town of Florence Design Criteria (115 mph wind, Exposure C; Seismic Design Category B; mandatory 80°F max cooling)
  • Residential Accessory Structure plan review fee is a flat $200 rather than percentage-of-valuation

Required documents

Check off what you have — your progress is saved on this device.

Not ready yet0 of 3 required documents checked.

This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29

Fee schedule

Residential Accessory Structure (Plan Review)Town of Florence Fee Schedule (Rev. 01/15/2025), Section 2, Plan Review Fee table
$200.00
Commercial Accessory Structure (Plan Review)Town of Florence Fee Schedule (Rev. 01/15/2025), Section 2
BOV (Based on Valuation, Table 1-A)
Remodel / Addition — Building Permit FeeTown of Florence Fee Schedule (Rev. 01/15/2025), Section 2; plan review fee is 65% of the calculated Permit Fee for BOV permits
Based on Valuation (Table 1-A) — see Residential Building Permit fee table for the valuation chart
Permit Revision Fee — ResidentialTown of Florence Fee Schedule (Rev. 01/15/2025), Section 2, Administrative Fees
$75.00

Review timeline

Plan reviewFlorence’s published plan-review target
20–35 business days

How long did your Residential Addition / Remodel / Accessory Structure Permit permit actually take in Florence?

Anonymous — one question, no email. Answers are combined and only shown once at least 5 people have reported.

Inspection process

  1. 1

    Foundation/Footing

    Required before concrete pour for additions/accessory structures with foundations

  2. 2

    Framing

    Structural connections to existing structure

  3. 3

    Final

    Completed work verified against approved plans

See the full Florence inspection guide — scheduling & re-inspection fees →

Tips

  • The Town's Submittal Review Timelines document groups 'Accessory buildings...remodel' together with new residential construction on the same 20/15-business-day (1st-2nd/subsequent) review track, plus the 10-day Administrative Review.
  • Detached one-story accessory structures (tool/storage sheds, playhouses, similar) 200 sq ft or less with a max 10 ft wall height are exempt from a building permit under the Town's IBC § 105.2 amendment — larger structures require a full permit.
  • Residential Accessory Structure plan review is a flat $200, distinct from BOV-based commercial accessory structure review.

Frequently asked questions

Only if it exceeds 200 sq ft floor area or 10 ft wall height — the Town of Florence exempts one-story detached tool/storage sheds, playhouses, and similar uses under that threshold from a building permit (IBC § 105.2 amendment). Larger accessory structures require a permit and carry a $200 residential plan review fee.

In Florence, the published Residential Accessory Structure (Plan Review) is: $200.00. Additional published fees: Commercial Accessory Structure (Plan Review) — BOV (Based on Valuation, Table 1-A); Remodel / Addition — Building Permit Fee — Based on Valuation (Table 1-A) — see Residential Building Permit fee table for the valuation chart; Permit Revision Fee — Residential — $75.00. These are the jurisdiction's own published figures — see the fee schedule table and source citations on this page.

Florence's published plan-review target for a residential addition / remodel / accessory structure permit is 20–35 business days.

You'll need: Building Permit Application; Site Plan; Owner Authorization Form / Owner Builder Affidavit. See the required-documents checklist on this page for details on each.

Florence requires 3 inspection(s) for a residential addition / remodel / accessory structure permit, in order: Foundation/Footing, Framing, Final. Schedule each through Town of Florence Community Development Department — Building Safety Division (520-868-7575).

Apply through Town of Florence Community Development Department — Building Safety Division at 224 W 20th Street, P.O. Box 2670, Florence, AZ 85132. Phone: 520-868-7575, email: TOFPermits@FlorenceAZ.gov. Office hours: Monday - Thursday, 7:00 a.m. - 5:00 p.m.; closed Fridays (Town of Florence transitioned to a four-day workweek effective January 5, 2026). Inspection Line: 520-868-7601. Residential submittals go through the online Residential Permitting Portal (SmartGov, twn-florence-az.smartgovcommunity.com); commercial submittals are emailed to TOFPermits@FlorenceAZ.gov; in-person submittals accepted (no rolled plans; 1-sided 8.5x11 paper only). Building Official: Kevin Wall (520-868-7556, kevin.wall@florenceaz.gov). Permit Specialist: Susan Cisco (520-868-7665, susan.cisco@florenceaz.gov). Plans Examiner: Hillarey Luther (520-868-7540). Community Development Director: Albert 'AJ' Monroe (520-868-7542).. Official information: https://www.florenceaz.gov/community-development/.

Florence, Arizona has adopted: Arizona has NO statewide mandatory building code floor for general construction — code adoption is a per-city/county authority under state enabling statutes (A.R.S. Title 9). The Town of Florence Town Council adopted its own Technical Codes by reference (Town of Florence Code of Ordinances § 150.300, Exhibit A) and independently administers permitting through its Community Development Department / Building Safety Division; it does not defer to Pinal County for permitting within town limits. Source: Town of Florence Code of Ordinances, Technical Codes, Exhibit A (Adopted Building Codes Amendments PDF).; 2018 International Building Code (IBC), including Appendices B, C, and I, adopted by reference (§ 150.300(A)(1)), with Town of Florence amendments. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A), effective per Town Council adoption (document created/effective 2022, current as of this review — no 2024 IBC/ICC-cycle adoption found in effect as of 2026-07-06).; 2018 International Residential Code (IRC), including Appendices G, H, and P (with Appendices E, H, J, P, and Q separately confirmed adopted at § R102.5 amendment), adopted by reference (§ 150.300(A)(2)), with Town of Florence amendments including amended Climatic and Geographic Design Criteria and a mandatory-cooling requirement. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; 2018 International Mechanical Code (IMC), adopted by reference (§ 150.300(A)(3)), with Town of Florence amendments (guards exception and mandatory cooling-system amendment for 1- and 2-family dwellings). Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; International Plumbing Code adopted by reference (§ 150.300(A)(4)); the Town's own codified adoption list states '2018 Edition' at the top-level adoption clause, but the itemized amendment section of the same official document (item 10) separately lists a '2012 Edition' with two specific section amendments (§ 410.3 Substitution; § 903.1 Roof extension) — this is an inconsistency within the Town's own published Exhibit A document, reproduced here verbatim rather than resolved by assumption. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A), §150.300(A)(4) and item 10.; 2018 International Fuel Gas Code (IFGC), adopted by reference (§ 150.300(A)(5)), with Town of Florence amendments (LPG appliance location restriction, minimum burial depth, test-pressure measurement procedure). Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; 2018 International Energy Conservation Code (IECC), adopted by reference (§ 150.300(A)(6)); the Town amended the code by deleting the entire Residential Section and Chapter 11 Energy Efficiency of the 2018 IRC. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; 2018 International Existing Building Code (IEBC), adopted by reference (§ 150.300(A)(7)) in its entirety without revision. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; 2018 International Swimming Pool and Spa Code, adopted by reference (§ 150.300(A)(8)) in its entirety without revision. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; 2018 International Fire Code (IFC), including Appendices B, C, D, E, F, G, and I, adopted by reference (§ 150.300(A)(9)) as the Town's uniform fire code, with extensive Town of Florence amendments (definitions, fire apparatus access roads, fire flow/water supply, alarm/suppression system requirements, open burning). Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; International Property Maintenance Code, 2018 Edition, adopted by reference (§ 150.300(A)(10)) in its entirety without revision. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; National Electrical Code (NEC) — the Town's top-level codified adoption clause (§ 150.300(A)(11)) states '2017 Edition,' but the itemized amendment section of the same official document (item 17) separately states 'National Electrical Code, 2018 Edition' when adding a new performance-testing subsection (Article 230.11) for 1,000-amp-or-larger service equipment. This is an inconsistency within the Town's own published document, reproduced here verbatim rather than resolved by assumption; both editions are cited directly from the Town's Adopted Building Codes Amendments (Exhibit A) as published.; ICC A117.1 Accessible and Usable Buildings and Facilities Code, 2010 Edition Standards, adopted by reference (§ 150.300(A)(12)) in its entirety without revision. Source: Town of Florence Adopted Building Codes Amendments (Exhibit A).; Manufactured homes and park models are regulated directly by the State of Arizona (Office of Manufactured Housing, A.R.S. § 41-4001 et seq.) for construction/installation standards; the Town issues a separate Manufactured Home Set permit ($450, per the most current Office of Manufactured Housing Intergovernmental Agreement) and a Park Model Placement permit ($450) for on-site placement. Source: Town of Florence Fee Schedule (Rev. 01/15/2025), Section 2.. Local amendments apply — see the Florence overview page for the full list.

Sources & verification

Verified against official sources. Last reviewed 2026-07-06.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Florence building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.