Solar Photovoltaic (PV) Permit — Woodland Park, Colorado · Requirements sheet
Verified 2026-07-20 · Source: https://www.pprbd.org/File/ByAlias/AlternativeEnergyResidential
PermitBase is an independent reference and is not affiliated with any government agency. Requirements change and vary by project — confirm current details with the building department before you submit.
Solar Photovoltaic (PV) Permit in Woodland Park, Colorado
Required for installation of rooftop or ground-mounted solar photovoltaic (and solar-thermal) systems within Woodland Park. Structural/electrical review and permitting is handled by the Pikes Peak Regional Building Department (PPRBD), which publishes a detailed 'Alternative Energy Plan Requirements' handout covering PV electrical, roof-mount, and ground-mount construction requirements (current as of 10/28/2025). PPRBD's own adopted code suite includes the Colorado Model Electric Ready and Solar Ready Code. No dedicated solar/PV fee line item exists in PPRBD's Woodland Park fee schedule — a solar installation is billed under the same Table A valuation-based Building Permit fee plus a per-trade Trade Permit Attachment Fee for the electrical trade, subject to Colorado's statewide solar permit fee cap.
Verified 2026-07-20 · Source
When you need this permit
- Written utility approval required, including location of any mandated disconnects; if an Energy Storage System (ESS) is installed, it must be referenced in the utility approval
- Site plan showing north arrow, location of all existing/new service gear and electrical equipment, raceway routing, module layout, and access pathways
- Manufacturer's module, inverter, and (if applicable) optimizer spec sheets; method of module grounding (NRTL-listed); GFDI spec sheet complying with NEC 690.41(B)
- One-line diagram showing conductor/conduit size/type/quantity, bus and overcurrent device sizing, and (effective January 1, 2023) pressure connectors/splices on service conductors marked 'suitable for use on the line side of the service equipment'
- Roof-mount: configurator printout/charts from the racking manufacturer OR a letter from a Colorado-licensed design professional showing design criteria (snow load Pf=30 PSF/Pg=43 PSF below 7,000' elevation, Pf=40 PSF/Pg=57 PSF above 7,000'; wind load Vult 130 MPH Exposure C), roof connection spacing, and fastener specs; elevated roof mounts require a design professional's letter on the roof framing's structural ability to accept point loads
- Ground-mount: only arrays exceeding 7 feet require a PPRBD building permit (the electrical permit still applies regardless of height); site plan must indicate the tallest point of the array, plus foundation depth/diameter/spacing per a design professional or manufacturer configurator
- All site-fabricated elements require a design stamped by a Colorado-licensed design professional
- A City of Woodland Park Zoning Development Permit (ZDP) may separately be required alongside the PPRBD building permit for site-specific plans, per this file's two-authority permitting model documented in tipsAndGotchas
Required documents
Check off what you have — your progress is saved on this device.
Not ready yet — 0 of 3 required documents checked.
This checker covers one permit. A full project usually triggers several — our paid checklist will assemble all of them, from $29 →
Fee schedule
Review timeline
Inspection process
- 1
Electrical Rough-In
Conduit runs, wire sizing, and disconnect placement before cover, per PPRBD's adopted NEC edition
- 2
Final and Energy Final
Racking, roof/ground-mount attachment, and electrical connections verified; per PPRBD's Required Inspections listing for structural work generally
See the full Woodland Park inspection guide — scheduling & re-inspection fees →
Tips
- PPRBD publishes a detailed, jurisdiction-specific 'Alternative Energy Plan Requirements' handout (current as of 10/28/2025) covering PV electrical, roof-mount, and ground-mount construction requirements — use it as the plan-set checklist even though it states no dollar fee.
- Ground-mounted arrays 7 feet tall or under do NOT require a PPRBD building permit — but the electrical permit is still required regardless of array height.
- PPRBD's own adopted code suite for Woodland Park includes the Colorado Model Electric Ready and Solar Ready Code, relevant if new construction is being reviewed alongside a solar installation.
- Even though PPRBD's Woodland Park fee schedule has no dedicated solar line item, Colorado's statewide solar permit fee cap (C.R.S. § 24-48.5-113) still limits total local permit fees for a residential solar PV system to $500 ($1,000 commercial) — confirm the cap is being applied if the valuation-based Table A fee calculates higher.
Frequently asked questions
Sources & verification
Verified against official sources. Last reviewed 2026-07-20.
Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Woodland Park building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.
Other permits in Woodland Park
Solar Photovoltaic (PV) Permit in other cities
Compare solar photovoltaic (pv) permit fees across Colorado →
Look up this fee in a different city →
Now live
Build your Woodland Park project checklist
Describe your project once and get every permit, document, and fee it triggers in Woodland Park — in one checklist. Sign up and pay once to generate it, or go unlimited with Pro.
Get started →