Do I need a permit for an EV charger in Millcreek?

Yes. Installing a Level 2 (240V) EV charger requires an electrical permit in Millcreek. Level 1 chargers that plug into a standard 120V outlet do not require a permit.

How much does it cost to install an EV charger in Millcreek?

In Millcreek, the EV charger permit fee follows the city fee schedule: Electrical Permit — $40-$75; Panel Upgrade — $75-$150 additional if panel upgrade needed. The permit is separate from installation — a typical EV charger install runs about $500–$2,000 (more if a panel upgrade is required). Check for Rocky Mountain Power rebates.

EV Charger Installation Permit in Millcreek, Utah

Required for installation of Level 2 (240V) and Level 3 electric vehicle charging stations at residential and commercial properties in Millcreek.

Verified 2026-06-27 · Source

When you need this permit

Level 2 (240V) EV charger installation
Dedicated circuit from electrical panel to charging location
Electrical panel upgrade if insufficient capacity
Commercial EV charging station installation

Required documents

Req
Electrical Plan
Circuit routing from panel to charger, wire sizing, and breaker amperage
Req
Load Calculation
Panel capacity analysis showing sufficient amperage for EV charger
Req
Equipment Specifications
Charger model, amperage rating, and UL listing

Fee schedule

Fee type	Amount	Notes
Electrical Permit	$40-$75	—
Panel Upgrade	$75-$150 additional if panel upgrade needed	—

Review timeline

~3–7 business days

Typical estimate — confirm current times with the Millcreek building department

Inspection process

1
Final
Circuit installed, wire sizing verified, GFCI protection (if required), charger mounted and operational

Tips

Most Level 2 EV chargers draw 40A and require a 50A breaker — verify your panel has capacity.
If your panel is full, a sub-panel or panel upgrade may be needed — budget $1,500-$3,000 for this.
EV chargers in Millcreek are treated as a standard electrical permit — typically fast approval.
Utah offers incentives for EV charger installation — check Rocky Mountain Power and state programs.

Frequently asked questions

Do I need a permit for an EV charger in Millcreek?: Yes. Installing a Level 2 (240V) EV charger requires an electrical permit in Millcreek. Level 1 chargers that plug into a standard 120V outlet do not require a permit.
How much does it cost to install an EV charger in Millcreek?: In Millcreek, the EV charger permit fee follows the city fee schedule: Electrical Permit — $40-$75; Panel Upgrade — $75-$150 additional if panel upgrade needed. The permit is separate from installation — a typical EV charger install runs about $500–$2,000 (more if a panel upgrade is required). Check for Rocky Mountain Power rebates.

Sources & verification

Key facts verified against official sources. Last reviewed 2026-06-27.

Fees, timelines, and adopted codes are researched from each jurisdiction's published records — see how we verify. Requirements change and vary by project, so always confirm the current details with the Millcreek building department before you submit. PermitBase is an independent reference and is not affiliated with any government agency.

Related guides

EV Charger

Get the AI compliance checklist

Upload your project scope, get a jurisdiction-specific checklist of everything you need. Coming soon.

We only use your email to send permit updates. No spam, unsubscribe anytime. Privacy.